Quote:
Originally Posted by strat61caster
I was under the impression that bolts only work for the front struts, the rears don't have holes that are reliable for using undersized or eccentric bolts to relocate, I can't seem to find what you suggest, please post a link and let this be a monument to my stupidity (I would have bought them 10 months ago to even out the rear if they were under $50). Install video, pics, anything.
All I can find are eccentric bushings for the rear well over $100.
http://www.ft86speedfactory.com/whit...l#.Vg69r3pVhBc
Edit: pics of the OE setup, it makes sense that it can be done as I know toe can affect camber there with the three mounting points affecting each other, I just missed the memo on a specific solution if one exists, seems to be scarce, my google fu is usually not so lacking.
 |
I don't know of anyone that sells something specifically for this, they're too busy trying to sell bling bling control arms that turn a larger profit. Well, that's how I interpret things. Whiteline did sell adjustable bushings for that location, but they stopped when they brought out their lower control arms. I tried to get them to reconsider but they wouldn't.
This is how mine look. It's pretty boring right. That bolt in the left side is an eccentric bolt.
The toe adjustment is no different that it would be with any after market control arms. I can't imagine how that hole couldn't take the mounting point being a couple mm out of position, or any other reason not to take this route.
I have a set of the bushings you posted, but I don't have them installed, they just weren't worth the hassle.