[aagun]

THX ^^

I update my rom ja01j

</table>
    <table name="Base Timing Idle (In-Gear)(Above Speed Threshold)" storageaddress="1159F8">
      <table type="X Axis" storageaddress="1159C8" />
      <table type="Y Axis" storageaddress="1159F0" />
    </table>

Originally Posted by Kodename47

After the last complaint, I have done a complete set of cross checking and fully defining what may reasonably be required. As I possibly have the most defined G series definition, I have gone through C,D and I and defined all the same tables. The folder structure may be different to others but I have tried to stick to Romraider's native naming structure where possible. I have checked that all tables are directly comparable. The links below have been updated. The only things that I now can't define easily are the CEL codes, although if anyone needs any that aren't defined then I'll see what I can do

The main updates:
All cranking tables defined (A through to J)
All Idle Tables (A through to I)
CL/OL Delay tables specific to AT or MT
Rev Limit B
Idle Ignition Timing specific to AT and MT
Idle Throttle Targets & Failsafe

If you downloaded on my last update, I would suggest that you download again.