|
sounds like you dont know what your doing. 25mm adapter is a standard size that will clear the stock studs. Even if you did 15mm now you have to make sure the back of your wheels have holes (aka pockets) were the extra length of stud will go into. if the back of the wheels are flat, nothing less than a 25mm adapter will work. also when you lower the car you get natural camber in the rear and most coilover comes with top hats for the front which then you can add a little negative camber to help the wheels clear, you can also get a smaller width of tire, and/or roll and slight pull the fenders to make them fit.
|