Quote:
Originally Posted by 1Cor10:23
Could you brake down how you would approach this?
My hypothesis is...
-6x WOT pulls
-30 minutes cruising highway
-15 minutes in parking lot (still necessary?)
-rest miscellaneous driving around town
When putting into VGI, would you chop up the log for OL to just include the 6 pulls and nothing else? Or just use the full log for both in one go?
If just upload the full log in one go, would I be correct in assuming you put in baseline MAF scaling into both the OL and CL tab and then load the datalog into both the OL and CL tab, and then generate on rescale tab?
Thank you!
|
Realistically you only need a couple of WOT pulls and 30 mins of normal driving. The more you get of either then the better the data will be though. Sitting at idle is rather unnecessary. You don't have to cut up any of the logs (except to remove the headers in OFT). The OL portion only looks for WOT data anyway.
Put your current scale into the CL tab and see what the Max V that has been corrected. Then copy that scale into the OL tab and ensure that the Min V is set above the corrected area from the CL scale so there is no double correction. Then smooth out the cross over area as there is likely to be differences.