Quote:
Originally Posted by Kodename47
The whole idea of the tool is that there is no need to do anything in excel 1st. The filter is really there so you don't overlap if you're scaling both. The minimum cell count will ensure no changes happen if there's not enough data in the upper voltages. If you're just doing the CL scale then you can leave set high.
|
OK, so that makes sense, Leave the voltage at 5 and the minimum cell count will remove data that is noise. Should I just leave the minimum cell count at 30 then? I'm assuming the cell count is not just total individual data points but actual contiguous blocks of data within a given time stamp?