Quote:
Originally Posted by RustySocket
So when I'm using the VGI tool (notice some of your work is included in there as well  ) should I set the MAF voltage filter to 2.5, 3.0 or 5? when working on the closed loop MAF scaling. Obviously I could take the log and remove all the OL data in Excel first. I'm just trying to grasp how the tool works and the best way to get a good MAF scale for my sensor. |
The whole idea of the tool is that there is no need to do anything in excel 1st. The filter is really there so you don't overlap if you're scaling both. The minimum cell count will ensure no changes happen if there's not enough data in the upper voltages. If you're just doing the CL scale then you can leave set high.