Quote:
Originally Posted by 86kahl
To me this IS a safety issue. Just because you can use an impact to over torque and compensate for the difference is not the same as following the manufacture torque. Stay safe and use the proper wheels with the right stud size torqued to spec.
|
Nowhere did I say anything about using impact or anything else.
Again: as long as you have the proper lug nuts to be able to have enough area on the lug seat of a wheel, it is not a safety issue.
What makes you think using a wheel with 14mm lug holes is a safety issue on a car with 12mm studs? Let's assume large-enough lug nuts were used and it is torqued down to manufacturer's spec without an impact gun.
-alex