View Single Post
Old 09-20-2015, 02:06 AM   #71
ShibaYuki
Senior Member
 
Join Date: Dec 2013
Drives: 2013 WRB Subaru BRZ Sport-tech
Location: Toronto, Canada
Posts: 153
Thanks: 29
Thanked 21 Times in 14 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Garage
Quote:
Originally Posted by steve99 View Post
Ok that log is looking heaps better, the ltft is now below 10% which is good.

It may have been because the ltft was so bad with crook original sensor ecu took a while to stabilse fuel trims. which now look ok

The wideband afr signal is still weird but it may be a logging error with oft.

I would clear the error code ad do some more driving and see if it returns as that code may have triggered when old sensor was installed or prior to leak fix.

I probably should have asked if you had reset ecu and how much driving you have done.

but it looking much better now, hopefully after you clear that code it will be good
I have been clearing the codes every time it pops up in the OFT. (No CEL in car though). Still the same codes, mostly P0171 and P2097. I have not reset the ecu at all and I have driven almost 2 full tank of gas already. I was also on limp mode for a bit this afternoon on the highway. So there should be something wrong still no?
ShibaYuki is offline   Reply With Quote