Quote:
Originally Posted by wparsons
Are you opening the file with something else and saving it after pulling it off the OFT?
This is what the time line should look like:
http://www.datazap.me/u/wparsons/jul...d?log=0&data=0
Now look at yours:
http://datazap.me/u/shibayuki/test-1?log=0&data=0
If that's happening without opening the file in excel and sorting it, then I'd post up in the tuning section and tag Shiv in the post. The log should be ordered by time ascending by default. Your first files were sorted on engine speed descending, the latest is engine speed ascending.
Short term fix, open the CSV file in excel and sort it on time ascending then re-upload it.
Also, don't worry about wideband AFR unless you have added an aftermarket wideband. AFR is the stock sensor channel. |
Quote:
Originally Posted by steve99
if you have never touched intake and intake is stock and you have a dry filter ( not oiled type) then it very ulikely it a maf issue. just leave the maf alone till you have checked front o2 sensor.
|
Alright! Here! I checked if the "Time" is ascending and it is! Hope you guys can find something out of this one.
http://datazap.me/u/shibayuki/updated?log=0&data=0-1
Also, driving around today and I started getting p2097 and the car also went to limp mode during a highway drive. Couldn't even push the car in 4th gear going 100 km/h.
I tried checking if the primary sensor is loose, and it's not loose at all.