[avishenoy1]

So I just installed RCE Yellow springs on to the stock struts and also installed the Whiteline adjustable endlinks with the stock sway bars. I'm getting a clunking sound on the front right side when going over bumps and while braking.

I have the endlinks at the shortest setting right now and I think they may be too short and hitting the strut since the ride height is only about .5" lower while the endlinks are at least an inch shorter than stock. They barely clear the strut when I have the front jacked up and the suspension is unloaded.

If I lengthen the end links do I need to add a extra nut to secure the threads? I ask because the links don't seem very stable when the threads are extended even a little bit.