Quote:
Originally Posted by randomthoughts
What did you use of polish your parts?
|
Aluminum Hard Lines:
I used Blue Magic Metal Polish but you could also use Mother's or Flitz. I used micro fiber towels in harder to reach locations to apply and buff and a Dremel with soft felt polishing wheels and cones.
Throttle Body :
I masked off my engine bay with tape (around the throttle body) and towels then proceeded to use a high speed corded drill with this
Polishing and Buffing Kit. I used a Dremel with soft felt wheels and cones for the nooks and crannies. Finished off my polishing with Blue Magic polish and a clean 2.5 inch cotton wheel.
__________________________________________
projekt zeal86 build