[FRSHunter]

You can simply repin if you only want your headlights to work as NO Daytime running lights, Low Beam with HIGH Led strips, and High Beam with HIGH Led Strips. If you want Daytime running lights you'd need to solder onto the pcb or tap somewhere else for power.

No Tick of Lights: No lights on at all
1st Tick (Parking): High Led strip
2nd Tick (Low Beams): Low Beams with High Led strip
2nd Tick (Highs): High beams with High Led strip

This is how mine is wired currently, I just unpinned the Halogen stock lights and took its plastic piece that would connect to the car and unpinned the 10 series lights and used the halogen stock lights plastic piece since the Halogen lights used a 6 pin connector and the 10 series uses a 8 pin connector even though the 10 series lights only have 6 pins.