|
Hey,
Just a quick question for the team that was involved with this kit,what is the measurement from the front of the bell housing to the centre of the shifter on that new tremec you installed?
I bought a salvage frs for the purpose of doing a LS swap,I can get any stock part off any car very easly and relatively cheap,I have a ls2 with 58x reluctor already and I'm looking for a tranny that will line up good..I realize it was stated that this build used a new tremec design but I'm trying to avoid buying brand new parts due to being on some what of a budget..through some research I found that a 04-06 GTO t56 lined up good with the competitor ls swap kit but after a lot of reaserch I decided to go with the vorschlag kit when it becomes available..so my question is will a stock t56 work and line up with the vorschlag kit..for example a 99-02 t56(out of a camaro) measures 29.5" from the front of bell housing to the centre of the shifter,04-06 GTO t56 measures 33"..will either of theses trannys work with the vorschlag kit and line up with the stock frs/BRZ shifter location or do I have to bite the bullet and call tremec to get the new ls magnimum xl?
Thanks,
Craig
|