Quote:
Originally Posted by GrimmSpeed
GrimmSpeed DIY Guide Series
Exhaust System/Exhaust Manifold Removal and Replacement
Updated 6/7/12
8. Next, we’ll remove the muffler from the car. The muffler is held on by two (2) 14mm bolts and four (4) rubber hangers, one on each corner of the muffler. Start by removing the bolts and then remove the muffler from its hangers, one at a time. I find that twisting the rubber hanger off of the muffler is the best way to get it started. Be ready when you’ve got it loose, as the muffler is a bit heavy.
|
Quick question about the muffler connection to the midpipe. Is there supposed to be a gasket between the two? I'm reverting to stock, and didn't install the replacement exhaust myself, so I don't know how it was originally setup. If there's not supposed to be a gasket, isn't leaking a concern?