Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Full throttle Electric Supercharger Build Thread

Shiv@Openflash · 08-30-2015, 11:57 PM

Hi guys,
Just for future reference:

For Procedes with the metal box, this value needs to be set to Analog Output 4. For Procedes with the watherproof plastic box, this needs to be set to Analog Output 3. All the Procedes come preprogrammed properly. The only time you will see a problem is if you upload a map designed for a different Procede type. In that case, you will need to change this output channel. When you change the number, hit OK. The change will not take into effect until the Procede powers OFF and then back ON

Cheers
shiv

08-30-2015, 11:57 PM	#9373
Shiv@Openflash Senior Member Join Date: Sep 2013 Drives: 2013 FRS Location: SF, CA Posts: 2,629 Thanks: 1,055 Thanked 5,470 Times in 1,494 Posts Mentioned: 605 Post(s)	Hi guys, Just for future reference: For Procedes with the metal box, this value needs to be set to Analog Output 4. For Procedes with the watherproof plastic box, this needs to be set to Analog Output 3. All the Procedes come preprogrammed properly. The only time you will see a problem is if you upload a map designed for a different Procede type. In that case, you will need to change this output channel. When you change the number, hit OK. The change will not take into effect until the Procede powers OFF and then back ON Cheers shiv