[yomny]

Originally Posted by GsxrMe

I also have the same exact clutch but I don't have any issues. I personally installed my clutch and made sure not to get to much grease on the spine and not to let any of it touch the anything! You may have grease on the disc that can warm up and cause it to slip. If the clutch doesn't fully disengage it doesn't want to go into gear.

I also made sure the small circle on the flywheel lined up on the engines crank notch to make sure I didn't get any vibrations. As factory flywheels and cranks have the same marks.

Could have something to do the grease you mentioned. Wouldn't not fully disengaging and me trying to push the gear in make a grind. This sucks,
I've read about the grease and I can't really say anything about the install as I didn't do it. All I could do is pay and have someone re do it as I don't have anyone that could help locally.