Quote:
Originally Posted by Lust
Need some help guys. So I took my car into my local shop, Speed Element, and had them do my alignment and height adjust. We decided that the car looks good with a 1 finger gap.
The issue I am having is with rubbing, even with ridiculous amounts of camber...
My current setup
Tein Street Flex Coilovers
SPL LCAs
Volk TE37sl 18x9.5 +40
Michelin Pilot Super Sport 265/35/18
Current camber f/r: -2.9,-3.7
Caster front left: 5.3
Caster front right: 6.1
Front toe: 0
Rear left toe: 0.12
Rear right toe: 0.09
We did a fender roll as well as cutting the tab in the rear fender yet I am still rubbing... Can you guys with similar setups go into detail on what you guys did to make it where it doesn't rub?
|
Really don't understand how you have rubbing issues. I have pretty much the same setup as you (KW V3 coilovers, SPC LCA, TE37 18x9.5 +45 265/35 cup 2 tires...) lowered about an inch, no rolled fenders and eyeballed zero camber and only rubbed in the driverside rear since it went a little lower once the coilovers settled. Raised it slightly and no rubbing at all. Going to get an alignment next week and plan to go about -2 in the front and -1,8 in the rear so there is no way you should have any rubbing issues at all.
Skickat från min LT26w via Tapatalk