Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - changing interior illumination from red to blue?

Suparu · 08-18-2015, 08:03 AM

Thanks for the link. I've swapped gauge faces before so I remember how tricky it was to pull the tach/speedo/etc needles off then try to put them back on.

There's still the center console which I thought might be tricky to swap the LED's because I have climate control, but I found a post for that: http://www.ft86club.com/forums/showthread.php?p=1959880

I'm probably going to pull the plug on the idea of converting the LED's from red to blue because it just dawned on me that the interior stitching is all red. I'd have to swap out all those bits for identical pieces with blue stitching like the Series.Blue trim to match the blue LED's.

08-18-2015, 08:03 AM	#5
Suparu Senior Member Join Date: May 2015 Drives: 2013 BRZ Limited Location: Atlanta, GA Posts: 123 Thanks: 115 Thanked 48 Times in 32 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Thanks for the link. I've swapped gauge faces before so I remember how tricky it was to pull the tach/speedo/etc needles off then try to put them back on. There's still the center console which I thought might be tricky to swap the LED's because I have climate control, but I found a post for that: http://www.ft86club.com/forums/showthread.php?p=1959880 I'm probably going to pull the plug on the idea of converting the LED's from red to blue because it just dawned on me that the interior stitching is all red. I'd have to swap out all those bits for identical pieces with blue stitching like the Series.Blue trim to match the blue LED's.