Quote:
Originally Posted by Slick
No issues with those wheels at all. If you find that they poke (up front), you may want to add camber or crash bolts up front to tuck the tops in a bit.
245/35 and 255/35 will fit without any problems, but going wider to a 265/35 in the rear is possible also.
How much lower than stock are you?
With a 265, you could be rubbing the outside edge of the fender and need to roll the lip a bit more than the factory bend. Inner wheel clearance should be fine. No issues up front.
|
Thanks!
The RCE Yellow springs give approximately 0.75-0.8" drop over stock