View Single Post
Old 08-16-2015, 12:07 AM   #1
philooo
Senior Member
 
Join Date: Mar 2014
Drives: 13' Scion FRS Track car
Location: miami
Posts: 417
Thanks: 76
Thanked 107 Times in 84 Posts
Mentioned: 7 Post(s)
Tagged: 2 Thread(s)
Aim Datachannels

I wanted to start a thread on the Aim advanced Datalogger and what they can read from the factory

I wanted to start by pointing to the latest specs I have found the Aim system can log for our cars seems to be version 1.06

Channels currently AVAILABLE on AiM loggers connected to "Toyota" "GT86/SCION_FRS":

  • RPM
  • Vehicle speed
  • Pedal position sensor
  • Brake pressure
  • Steering angle
  • Brake switch
  • Engine Coolant Temperature
  • Intake air temperature
  • Manifold air pressure
  • Ambient Air Temperature
  • Barometric pressure
  • Lambda value
  • Throttle position
  • First Catalyser temperature
  • Clutch switch
  • Front left wheel speed
  • Front right wheel speed
  • Rear left wheel speed
  • Rear right wheel speed
  • Oil temperature
  • Engaged gear

I hope Aim will add more channels in the future.

CHANNEL NOT yet available on the Aim System...AND useful for track users
  • Gas level - PID ?
  • ABS light - PID ?
  • Traction control light(s) - PID ?
  • Check Engine Light - CEL - PID ?

CHANNEL NOT yet available on the Aim System... may NOT be useful
  • TBD

DATA that may be interesting but requiring new sensor
  • Fuel Pressure - see PST for custom sensor.
  • All sorts of temperature: brakes, tires ... - see PST for custom sensor
  • Suspension travel - see PST for custom sensor
__________________

Last edited by philooo; 08-16-2015 at 11:34 PM.
philooo is offline   Reply With Quote