Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Better handling by removing/reducing swaybars?

solidONE · 08-14-2015, 02:23 AM

BTW I was able to get as much as -3.0 of camber up front on factory suspension with 2 sets of camber bolts on the knuckles. Although, you might get some clearance issues running that much camber using camber bolts. $60-70 bux for -3 degrees of front camber. You can't beat that. One set of camber bolts will at least get you a good -1.5 degrees if not more for $30 bux. If you want more traction on the front wheels you're gonna need more front camber.

At the old saying goes "once you go negative camber, you'll never go back" or something to that extent. lol

08-14-2015, 02:23 AM	#65
solidONE Senior Member Join Date: Dec 2012 Drives: FR-S Whiteout Location: California Posts: 2,863 Thanks: 1,808 Thanked 791 Times in 611 Posts Mentioned: 42 Post(s) Tagged: 0 Thread(s)	BTW I was able to get as much as -3.0 of camber up front on factory suspension with 2 sets of camber bolts on the knuckles. Although, you might get some clearance issues running that much camber using camber bolts. $60-70 bux for -3 degrees of front camber. You can't beat that. One set of camber bolts will at least get you a good -1.5 degrees if not more for $30 bux. If you want more traction on the front wheels you're gonna need more front camber. At the old saying goes "once you go negative camber, you'll never go back" or something to that extent. lol __________________ Intent > Content cowardice is the mother of cruelty.