Quote:
Originally Posted by glamcem
That was the oil I was using last year with the same thing in mind
|
More explanation:
http://www.ft86club.com/forums/showp...&postcount=142
So yes, the thinner oil will be *a bit* better at shedding heat but please... PLEASE, don't blame your cooling system problems on your oil. Just fix your cooling system problem like AZP suggested, don't get a water/heat exchanger setup, get separate cooling systems for your coolant and oil. You're already experiencing a lack of cooling capacity no need to introduce an alternate option that allows your overly hot oil to remove cooling capacity of the new system.
Please achieve optimal oil pressure at your operating oil temp with whatever wt oil gets you to that point. Choosing an oil that's too thin simply because it "runs a bit cooler" most likely is robbing peter to pay paul for lack of a better euphemism. If you're dead set on running a 0w-30 come hell or high water, then you really need to bring down those oil temps.