Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - PSA: Clamping EVAP hoses under Intake Manifold, the easy way..

Jhood · 08-13-2015, 11:21 AM

Insane how easy these hoses come off, I had my wastegate line secured to one of these EVAP lines not realizing it pulled it right off. Just finished mine this morning, didn't have to remove anything besides the A/C though.. figured out that if you attach the corbin clamps to the hoses then you can manage to shove them back on the plastic nipple with out the use of pliers. Just some patience with it and all 5 are now snug.

08-13-2015, 11:21 AM	#61
Jhood Member Join Date: Jul 2014 Drives: 2014 BRZ Limited [6MT/SWP] Location: Long Island, New York Posts: 51 Thanks: 13 Thanked 35 Times in 11 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Insane how easy these hoses come off, I had my wastegate line secured to one of these EVAP lines not realizing it pulled it right off. Just finished mine this morning, didn't have to remove anything besides the A/C though.. figured out that if you attach the corbin clamps to the hoses then you can manage to shove them back on the plastic nipple with out the use of pliers. Just some patience with it and all 5 are now snug. __________________ \|FBM Stage 1 Build\|GTX2867R\| \|Moto-East Flex Fuel & Dyno Tune\| \|360whp / 265tq (E81 @ 12psi)\|