Quote:
Originally Posted by j123ic
You're absolutely right Mike. I just wanted to add that the E-Force kit utilizes .75" id intercooler hoses, whereas others are using .625" or smaller. Additionally, the waterpump flows double the amount at 8gpm v.s the older Bosch unit at 4gpm.
Based on images I have seen online, both Harrop and Cosworth are using Bosch pumps.
Lastly, fin density on both the charge-air-cooler and front heat-exchanger is key. It may be too early to find this info, but Edelbrock usually posts the performance specs of each in BTU's/hr. Basically, you can't tell how something will perform based on size alone.
|
agree about the BTU statement, I'd be surprised if they release that information thou
I remember the cosworth statement was the coolers were good for about 35Kw of heat rejection which they equated to about 400Bhp
also the cosworth hoses are 0.75" not 0.625"
and have you got any details about this 8 GPM pump? I'm always on the lookout for better pumps..