Hey everyone! As all of you are aware, there is absolutely no shortage of force induction kits for the FRS/BRZ platform, (which is not a bad thing
) but we are always looking for ways that we can improve on our own kit. We are very proud of our kit, and we know it's a great choice for some people. However, we can't deny the fact that there are other cheaper alternatives that get the job done. So we took a step back to see what we could do to be more competitive, and cater to different budgets. Now, there are a few different ways to go about this. We could look into turbo kits made over seas and brand them as ours, or outsourcing of other fabricated parts and accessories. Although those options were close to fruition, we felt we needed to stick with our company goals of providing quality in house fabricated parts, at a fair price, while maintaining exceptional customer service. So we decided to make a pretty simple, yet effective change. Currently our turbo kits consist of a scheduled 10 stainless steel manifold. This is a strong, beefy unit, but it's quite expensive, and labor intensive to make. However, switching to a 16 gauge design, we were able to reduce the price in materials, but more importantly, shave 6 hours of fabrication labor!This should reduce the price of our complete kit down to a more competitive price level. Customers will be able to choose between the manifolds of their choice. We are currently still in the R&D phase of things, but I did snap a few shots during my lunch break. Don't hesitate to hit me up with any questions you may have!
