View Single Post
Old 07-27-2015, 06:20 PM   #8
Lee
Member
 
Join Date: Sep 2014
Drives: GT86
Location: Scotland
Posts: 67
Thanks: 11
Thanked 53 Times in 30 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by glamcem View Post
I had some rubbing issues with the same tire, wheel size and similar drop (about 1 3/4")..
FYI, I have 9k Front/ rear spring rates so yours should be even worse since springs are softer.. you can definitely consider raising the car a bit (1/2" should help), you can try adding a bit more neg cambers to the front as well but not as much as the springs and/or the ride height.. in my case it helped me but I still rub at times when the elevation changes are instant (like the corkscrew at our local track)..

good luck
Cheers, do you still have the stock bars?

Quote:
Originally Posted by glamcem View Post
assuming you have camber plates in the front since 1.25" drop alone shouldn't be enough to get ~-3.0 neg camber
Yep - camber plates and camber bolts are fitted.
Lee is offline   Reply With Quote