Quote:
Originally Posted by Dream20b
Mmmhmm, ITs an intermittent code, happens very rarely, no defouler or anything, probably forced readiness from ecutek though.
|
Only way to know for sure is to scan it and check readiness monitors.
If the code is intermittent, you may still have the "Pending" code stored in the ECU which may fail you. I think you may be allowed pending codes but it really depends on what the codes are. For catalyst efficiency below threshold, I would not waste my time getting tested if the code was pending as it would likely result in a fail
Scan for codes/readiness monitors, its the only way you will know for sure if you will pass/fail. I had to request certain things be disabled/forced as far as monitors are concerned with ecutek