Quote:
Originally Posted by AzureShadow
Could someone please clarify on the few questions I posted earlier, I am really interested in doing this mod.
1. The blue wire on the passenger side looks like it is soldered between 2 traces. Which trace is it actually connected to?
2. The red line to cut the trace under the blue wire on the passenger side looks as though it is going over both traces, but the instructions seem to indicate that you only cut one, can someone clarify this?
3. And last, on the passenger side, the trace cut to the right of the board looks like it is also meant to be for both traces, is this correct?
|
When you see the trace in person it makes more sense. Basically you are making two cuts to isolate the trace to the LED negative terminal, and you're soldering the blue wire to that.