Quote:
Originally Posted by Racecomp Engineering
It is possible to preload the swaybar. Ideally the endlinks should be at the length where they just line up with the holes in the bar at normal ride height (i.e. installed with the suspension loaded).
- Andrew
|
Well the thing is the I was able to get the end links to fit in with no preload and with the car on the ground. I was able to fit shorter end links by rotating the sway bar arm (with the holes on it) closer to the shock so they would fit.
No ones done this before so that's why im wondering if it's bad.
I autocrossed yesterday and it actually under steered much harder when I overdrove the car but seemed to feel very controllable at the limits.