Quote:
Originally Posted by xxscaxx
Its one of those things that when you look at it you are like "....oh!". You are like me and when something isn't in front of you, you want to know exactly how it goes on and end up over analyzing it 
If you look back to @ erok81 post you can see how each line is ran to each spot to give a general idea of where they go.
http://www.ft86club.com/forums/showp...&postcount=258 |
That is one way to run it:
I preferred to run the coolant lines down off the turbo and then ran them together over to the driver side frame rail and the one heads to the back of the motor and the other goes kind of behind the A/C compressor and under the intake into the fitting on the coolant jacket on top of the motor. This keeps them hidden, but my FBM kit came with quite a bit of hose to allow that to happen. You can kind of make them out on the driver side frame rail in this shot:
