Quote:
Originally Posted by Teclis
Where did you connect the innovate gauge for power and dimming?
And what size is needed for the fittings?
Going to get the innovate temp & pressure gauge too, and this look like a great idea to put the big pressure sensor  also where did you put the temp sensor for the innovate gauge?
 |
Temp sensor went onto the top galley plug. You'll need the galley plug adapter to do that one, here's the part #:
http://www.rallysportdirect.com/Suba...il-Galley-Plug
The pressure sensor I literally followed the tutorial linked exactly. Keep in mind, I had mine off a 90 degree brass tee with my FBM kit. Not sure if it mates properly to the block. I believe the thread is BSP and the innovate gauge is NPT (or visa-versa) so you want to be careful you don't crossmate them. You may need an adapter.
Dimming I pulled off the head unit wiring harness. There's a few spots, but that one worked for me. I wired the innovate and the AEM to the same tap.
See this topic:
http://www.ft86club.com/forums/showp...9&postcount=16
For power there's a bunch of options, I don't remember where I wired mine in to.
Hope that helps!