Quote:
Originally Posted by iag48st
4.88 is my next mod for my AT. Kodyo does Weir have EVERY single piece needed to have a shop install it?
|
Yes and no. I believe a shop will need to buy new shims to shim the diff/ring gear left to right. These shims are more specialized and I doubt he sell them, I got mine from Toyota. All other shims and parts he sells, including seals, bearings, gears, and spacer. If you're reusing your stock pumpkin, I'd reuse the bearings but still have a shop replace the three rubber seals. I'd recommend getting a solid spacer as well instead of the crush spacer. This also has to be shimmed, but will make your diff mor robust (this spacer sets preload between the two pinion bearings).