Quote:
Originally Posted by Jesse@JDLAutodesign
Here's my personal work in progress...I'm just about done with the wiring harness so hopefully it will be running soon 
 |
You should totallllly make me one of those turbo heat shields...just saying
Also quick question for you. Your new 3 port catch can - I have noticed with other cans that run the PCV line and CCV line to a can and eliminate the other lines that they are all VTA cans with a breather filter on them. Technically your setup is a closed system because it routes to the intake but just wondering if lets say you wanted to run a catch can with the PCV line and CCV line to it and thats it, if it would be ok to do so (without running it to the intake pipe). Then again those other cans usually eliminate the PCV valve and i'm pretty sure yours does not. I am running dual Radium cans so I have a can designated for the PCV and the other will have a line from the CCV to the catch can and then the other side to the intake pipe...but just curious.