Quote:
Originally Posted by xxscaxx
Well I had ordered one with intentions of running it right off the turbo...so I looked for one that was a bit shorter than the one that came with it and ended up ordering SN-2580. I was looking for one similar to the filter JDL runs off their 30r setup I think.
The one provided is RU-5090, and its a little over 5 1/2 long. The one I ordered is 4" and also is tapered so there will be more clearance near the ABS unit. The bottom diameter is slightly larger than the 5090 but it tapers to 3" which is 1" smaller than the provided 5090. I'm going to try to run it with the intake first but we will see. I may have to return it but i'll keep you posted.
|
Oh I keep forgetting this is for the gtx turbos. Let me knows how it goes. I went to k&n website and sarcjed by dimensions, basically length under 3.5" and flange diameter 4" in your case. I'm not sure in your case how much space you have between the turbo I let and the abs unit or the chassis which is right behind the driver headlamp, there's a little piece there which interferes first. Best of luck.
__________________
GTX2867R, moto-tuned , tomei op , motiv fp , Invidia Q300 ti , Rota titan 17x9 +42 , nt555 255/40 , ST coilovers w/cascam , Hotchkis sways
|