[yomny]

Bringing over some discussions we were having about a minor gasket leak and other questions being asked by members.. Trying to keep all content related to the kit here to help others.. @xxscaxx @erok81 @Rybot @drambo136

Had this little guy here(pic below) leak, or seap a little bit.. replaced it with a gasket I made from gasket paper I picked up from the local hardware store. Apparently it wasn't high temp so it leaked after a day.. found a local shop that had genuine turbo oil drain gaskets for the T3 housing and replaced it. So far so good but too early to determine. I've used Loctite on the bolts to prevent them from backing out. Made sure the drain hose isn't forced or under any tension when bolted as to prevent the leak.. everything is loose and comfy. Regardless I have a different flange coming in, in case this sucker decides he still wants to oversaturate itself and drip.

Current leaker...


Replacement, just in case.