View Single Post
Old 06-21-2015, 06:53 PM   #2
KoolBRZ
Senior Member
 
KoolBRZ's Avatar
 
Join Date: May 2014
Drives: Silver 2013 BRZ Ltd Auto 45,000 mi
Location: Vancouver, WA.USA
Posts: 965
Thanks: 86
Thanked 452 Times in 278 Posts
Mentioned: 60 Post(s)
Tagged: 2 Thread(s)
Garage
Quote:
Originally Posted by erok81 View Post
has anyone installed one of these on their brz or frs? I put one on my brz and the raise to start (or really my normal driving height) doesn't work. I have to raise it past that height "driveway mode" then hit back to my ride height. Otherwise I am sitting a good inch below where it should be. And he pressure setting is the same before and after. Just a massive height difference.

I've emailed air lift a couple times and never heard back. How are you your kits working?
I'm putting my kit back on next week, but when I had it on I noticed when raising it up, it didn't always come up to the same height at the same pressure, so with some trial and error i found out it only stops at the right height if I drop it down from max, so I stopped using the hard park feature. If you want to use the hard park feature,(slammed when car shuts off) set your normal ride height preset to max height, then use another preset as your normal ride height and drop it down to that. That way you should be at the right height to clear your driveway, and can even leave it at max height to clear the driveway, then when you drop to normal ride height, it will be the right height.
KoolBRZ is offline   Reply With Quote