Quote:
Originally Posted by CybexBRZ
I was wondering if those:
Green = Left speaker signal input from HU [PIN 3 and 9]
Purple = Right Speaker signal in from HU [PIN 4 and 10]
Does this signal is the same signal sent to the front dash speaker?
If I could unplug the front signal from the HU and then feed those Green and purple from the back from a 4 chan amp to front dash speaker.
and also use the grey and white for the door as already described.
I already have a RCA going to the back to feed my amp
Thank you
|
Yes, you can re-purpose the wires. I just wouldn't run any insane power through them. Use a continuity test on a multi-meter to confirm each wire before using.