View Single Post
Old 06-13-2015, 05:13 PM   #180
CybexBRZ
Junior Member
 
Join Date: Jun 2015
Drives: Subaru BRZ 2013
Location: Quebec, Canada
Posts: 5
Thanks: 0
Thanked 1 Time in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Feeding dash and door speakers from 4chan amp using oem wire from the back?

I was wondering if those:
Green = Left speaker signal input from HU [PIN 3 and 9]
Purple = Right Speaker signal in from HU [PIN 4 and 10]

Does this signal is the same signal sent to the front dash speaker?

If I could unplug the front signal from the HU and then feed those Green and purple from the back from a 4 chan amp to front dash speaker.

and also use the grey and white for the door as already described.

I already have a RCA going to the back to feed my amp

Thank you

Last edited by CybexBRZ; 06-13-2015 at 05:14 PM. Reason: Put a title
CybexBRZ is offline   Reply With Quote