Quote:
Originally Posted by markw
Bone stock Koni's just like the one you pictured. Camber is right at 2 degrees. When I took it in for alignment after installing them, the shop had the initial at like 2.6 on one side and 2.3 on the other. I have the factory camber correction bolts in the upper hole, and I tightened them with a jack under the hub compressing the spring, then tightened the two bolts at the spindle, and then the top 3 bolts. I told them to pull it back to 2 degrees as I "daily drive" it.
Mark
|
Hrmm... if one more person would like to share the same experience... I'd like to order some Koni's...