View Single Post
Old 06-04-2015, 02:12 PM   #3182
solort
Senior Member
 
Join Date: Nov 2013
Drives: Series 10 FRS
Location: AL
Posts: 177
Thanks: 3
Thanked 30 Times in 19 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by ChrisV View Post
I'm waiting on my fronts to arrive. I'll measure them to be sure, but I'm going to have faith that Koni got it right.

When I had my Evo X everyone swore the Bilsteins from the MR and SE weren't legal because of the overall extended length based on one post on the forums. I thought it didn't make sense, and bought them anyway. They measured perfectly legal.

I think this will be a case of the same. Note that the loudest voice of them being illegal is someone who hasn't held them or measured them, but is rather asserting since you can get more camber they must be illegal, completely disregarding the legal factors that would result in a lower ride height and more camber.
Thx Chris. That will be great info.

Also researching the TRD swaybars, but read conflicting info. Sone sources say rear bar is 16mm while others sat 17.5mm. And all I can find for the front is 20.6mm vs no listing. Can someone put a set of calipers on both of theirs so the true size will be known. And from what I can tell, both of the TRD swaybars are non adjustable and only come as a set vs either front or rear?
solort is offline   Reply With Quote