View Single Post
Old 06-01-2015, 01:13 PM   #8
atledreier
Senior Member
 
Join Date: May 2012
Drives: GT86 DGM
Location: Sandnes, Norway
Posts: 623
Thanks: 22
Thanked 197 Times in 110 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Garage
Measured values after the alignment:

All values are left/right side and degrees

Front:
Caster: 5:48/5:54
Camber: -0.24 / -0.36
Toe: +0.03/+0.03

Rear:
Camber: -1.54/-2.24
Toe: 0.0/0.0

So, it seems the front toe is actually very slightly positive, not sure if this is out or in, it doesn't say. The spec says minimum -0.45 and max +0.45 degrees, again, doesn't really give me anything to determine if it's in or out.
The rear camber stands out as very uneven, but apparently that was the best they could do with no adjustable rear arms.

The car is lowered just shy of an inch, and I run 20mm spacers front and 25mm rear. Stock wheels, 225/45-17 Michelin Pilot Sport 3 front and rear.
atledreier is offline   Reply With Quote