I apologize in advance if anything I ask is something that should be obvious to you, its not to me.
Day 1 got the OFT. Followed the videos, uploaded BIN files.
Stage 1 93 octane and stage 2 e85, saved them in slot 2 and 3.
Went outside flashed the car stg 1.
Fast forward 2 months... I have not used the OFT since the 1st time. Sitting in my car I remember I have it and wanted to finally try out the Real time diagnostics (I never did the first time I used it)...
Here's where it gets interesting for me...
I plug up the flash tablet, I press write, I see the asterisk next to the stage 1 tune, reminding me that's what I am currently on, all good, except my idiot self pressed on the stock tune and starts to write it, ofcourse I am not going to just unplug the Tablet mid-through a flash so I said screw it worse that can happen I flash it back.... then I get this....
I said perfect, I must need to update the tablet, saved by the bell...
Except when the tablet takes me to the tunes screen there is now no asterisk to be found on neither the stock tune or the stage 1....
That's problem # 1.... any ideas? I turned the car off and unplugged the tablet. Should I go outside and attempt at writing stg1 again?
Problem #2...
Whenever I go to real time diagnostics I get this message...
weird part is, if I keep clicking on OK on that screen eventually it works
Can someone please take a look at the reading and tell me if something is out of range or anything I should be concerned with.
Thanks and sorry for the long post.
