Quote:
Originally Posted by Stormalong
So I installed the Procede yesterday, but it doesn't seem to be working.
When I've got the software running, the yellow cell at the bottom left never moves, which indicates that the throttle tap isn't working. So I re-did the throttle tap, but it still doesn't work. What is confusing me is that there is a cyan cell that DOES move when I rev the engine. Also the numbers for "Throttle" and "Raw Throttle" in the top right panel do change when I rev the engine, which would suggest that the throttle tap is working.
Anyone have any insight here?
|
At the top left there's an RPM and a load index. Are they reading anything? RPM should read your current RPM with the engine on and load should be the % of throttle you put on the gas. So if you tap it a little bit it should jump to like 15-20%.