Backing the screws out a little from the back of the hub and whacking those with a hammer did the trick. It was stubborn as hell and didn't want to come out, but it slowly walked out. Going to spend some time cleaning the parts and coating the surfaces in anti-seize before putting it back together again.
For those of you lucky folks that don't have to endure an Iowa winter...here's what it does. Keep in mind I had this apart when I installed the ducting for Sebring in January. I had these parts so clean you could eat off them. So this is 4 months on the car, and maybe 1-1.5 months of a winter.
