Quote:
Originally Posted by Teclis
I'm saving up for a set of work meister S1 3P, and are wondering what Off set I would need to be flush, I know I need different offset for the front and back, but not how much?
I'm going with 18x8, I got the TRD adjustable spring kit so it's lowered with 15mm.
And I will not stretch the tires 
Cheers from Norway |
35 offset is good in the front, about 25 in the rear. If you have a lot more camber than me (I have 1.1 in front), then something closer to 25 will look good, but I'd stick with 32-35. Feel free to look at my build thread to see my wheels. Both my aftermarket wheels were 35 offset.