Quote:
Originally Posted by l0aded
Anyone try this on Windows 10? Only have one laptop =X
Any of the first batchers get it working yet?
Edit:
- Windows 10 does work.
- RPMs and load registered so looks like the taps are OK.
- Map is loaded.
- Need to check voltage on foot pedal switch at work tomorrow. Chances are the voltage is not going through.
Can someone confirm something for me? For Rev2 versions, the ESC should activate when the foot pedal aux cable is UNPLUGGED correct?
|
It's possible the female stereo plug may not be soldered to the correct point. You need the tip of the male end to register the voltage changes. Double check which part of the female end is soldered to.
Sent from my iPhone using Tapatalk