Quote:
Originally Posted by churchx
Sometimes i wonder why no vendor yet released full underside aero kit (thinking of like for trd griffon). Imho it should be simple to design/make (at least if middle is modular with cutouts for different most popular aftermarket exhausts, or with templates for cutouts to be done DIY), and i guesstimate there would be market for such. Especially if some might use it as cheaper alternative to partially covering OEM underside panel set of higher trims missing for eg. USDM frs. |
Ive looked into making my own, and it seems you can realy screw up the cooling of the rear diff, and transmission if you dont know what your doing. note the naca ducts under the griffon car. might be more complicated to blank off the entire bottom of the car than it seems.