Quote:
Originally Posted by Shiv@Openflash
Try downoading it again from the website.
|
@
Shiv@Openflash
Hi Shiv,
Think I have discovered a bug in tuning Alerts. I am pretty sure it worked fine initially. But appears and update may have introduced a bug.
Now you cannot set up alerts with "OR" the oft screen says OR and then you save alerts but when you check them its set back to AND.
Trying to set these up these three separate alerts
Coolant greater than 212
OR
OIL TEMP greater than 240
FLKC less than -1
OR
Knock Correction less than -1
OR
Advance Multiplier less than 0.9
AFR greater than 13.5
AND
RPM greater than 5000
AND
Load greater than 1.0
I save it and all looks ok , but go back in and check and every alert set to AND
ie all the OR become AND on save
Also when any alarm triggers you cannot reset it with reset button it just keep beeping/flashing and reset is greyed out for some reason
Running 1.19.0 and Template 7.1
Could you have a look
Thanks
Steve