Quote:
Originally Posted by steve99
Is your car boosted ?? it help to know what mods you have :-)
What looks suspect is Knock Corrections up to -5 degrees in longer log and advance multiplier dropping to 0.35 indicating regular and quite large knock events
are you running correct octane fuel for your tune ?
read the DTC code for the cel light that does not show up in logs.
|
Full 2.5' exhaust, Boosted with BOV and EBC Omni Map sensor CEL Code P0068 supposedly running tune for 10psi on 93. Just filled up with 93 from 1/4 tank of 93.
Symptoms = bogging under WOT,
RPM increase when clutch pedal depressed unless selector moved out of gear
bogging below 3k rpm
CEL code resulted in loss of acceleration until car shut off. Would start and run poorly. Then would not start then would start and run okay.
I'm thinking either faulty MAP or bad tuning? Do the fuel trims appear okay?