Quote:
Originally Posted by Andrew025
Both blocks of code will go into the definition.
|
Yeah I know that but, my question is where should I paste the blocks of codes? From my intuition on programming, I know that if I were to copy and paste the block of codes into a random place, the program as a whole wouldn't function as intended.
Well anyways, I got it to work. I see the MAF Correction After Start (In Gear) and (Neutral). What I did was copy and paste both code blocks and placed them where, acj47, placed his/her's.
I copy and pasted the first block of code
after
Code:
<table type="Y Axis" storageaddress="104E98" />
</table>
and I copy and pasted the second block of code and pasted it before:
Code:
<table type="3D" name="Engine Load Compensation A (MP) "...
I'll go ahead and save this, and flash it onto my car. I'll report back whether my ecu is "bricked" or not.
